Free written estimate before any work begins
Chimney Sweep in Fremont, CA
Creosote and soot removed to CSIA standard, with drop cloths down and a HEPA vacuum running the whole time.
Licensed & insured · 134 reviews
Get a Free Quote
Fast response. No obligation.
Chimney Sweep for Fremont homes
Fremont was assembled from five older towns and still reads that way, which means the housing stock jumps by decades as you cross between districts. Niles holds genuine turn-of-the-century buildings with original masonry, and Mission San Jose has pockets of similar age alongside much later development. Centerville, Irvington and Warm Springs are dominated by 1950s through 1970s tract housing with modest fireboxes, and Ardenwood is later again with a high proportion of prefabricated metal systems. The city also sits along the base of the hills where the Hayward Fault continues south, so in the older districts seismic condition is part of any honest assessment. When we take a Fremont booking the first thing we establish is which of the five towns the house is actually in.
Formed from five historic towns, so building age changes sharply by district: turn-of-the-century masonry in Niles and parts of Mission San Jose, 1950s-1970s tract housing through Centerville, Irvington and Warm Springs, and later prefabricated systems in Ardenwood. The southern continuation of the Hayward Fault makes seismic condition relevant in the older districts.
Included in every job
- Chimney fire risk removed
- A fireplace that actually draws
- Problems found while they are cheap
- No mess left behind
Warning signs
When Fremont homes need this service
- It has been more than a year, or more than a cord of wood, since the last sweep
- Smoke pushes into the room when you light a fire
- A sharp, tarry smell from the fireplace on warm days
- Black, flaky or shiny tar-like deposits visible above the damper
- You hear rustling, scratching or birds in the flue
- The damper is stiff, will not seat, or has rusted in place
- Dark staining spreading on the brick above the opening
Chimney Sweep in Fremont
Call (209) 447-0752 for same-week availability.
Process
How the visit works
Set up and seal
Drop cloths over the hearth and floor, and the fireplace opening sealed so nothing escapes into the room.
Sweep the full run
Rotary and hand brushes from the firebox through the smoke chamber, throat and flue to the cap, sized to your flue.
Vacuum under negative pressure
A HEPA vacuum runs the whole time so the soot goes into the machine rather than onto your furniture.
Inspect what the brush exposed
Camera and visual check of the liner, damper, smoke shelf and crown now that the surfaces are clean.
Report and photograph
We show you what we found, photograph anything that needs attention, and give you the written estimate before any repair work.
Questions
FAQs
Do you cover all of Fremont?
Yes, from Niles and Mission San Jose through Centerville, Irvington, Ardenwood and Warm Springs. Because the districts differ so much in age, we ask which one you are in when you book so we arrive with the right expectation.
My Niles house is over a hundred years old. Can the chimney still be used?
Often yes, but not on assumption. Masonry of that age in this area is usually unlined and has had a century of ground movement, so a camera inspection of the flue is the starting point rather than a sweep.
How often should the chimney be swept?
Once a year for anything you burn regularly, and the industry standard is an annual inspection regardless of use. If you burn most evenings through the winter, or you burn wood that was not fully seasoned, it is worth doing before every heating season.
How long does a sweep take?
A straightforward single fireplace usually runs about an hour to ninety minutes. Heavy glazed creosote, a blocked flue or a second fireplace adds time, and we will tell you before we start rather than after.
Contact Alpine Chimney
Alpine Chimney Company
1080 Broadway
Millbrae, CA 94030
(209) 447-0752
info@alpinechimneycompany.com
Request a Free Quote
Fast response. No obligation.