Free written estimate before any work begins

Chimney Liner Installation in the San Francisco Bay Area

Stainless steel liners sized to the appliance and the flue, insulated and fitted to bring an unsafe chimney back into service.

Licensed & insured11 years experience5.0 star ratedUpfront pricing

Licensed & insured · 134 reviews

Get a Free Quote

Fast response. No obligation.

1-2 daysTypical installation
StainlessSized to the appliance
InsulatedWhere the flue needs it

Why chimney liner installation matters

A cracked flue lets flue gases and heat reach the timbers built into the chimney breast. That is the mechanism behind most house fires that start at a chimney. It is also the most common reason an inspection condemns a fireplace, and relining is usually what brings it back into service.

Our guarantee

If you are not satisfied with the result, we come back and make it right at no charge.

Benefits

What you get

A cracked flue made safe

The most common finding that takes a fireplace out of service, and the repair that returns it.

Sized to the appliance

An oversized flue on a modern stove runs cool, drafts badly and glazes with creosote. The liner is sized to what you are actually burning.

Insulated where it should be

Insulation keeps flue temperature up, which improves draft and slows creosote formation, particularly on an exterior chimney.

Easier to sweep from then on

A smooth stainless liner cleans more easily and more completely than cracked and stepped clay tile.

Warning signs

When to book chimney liner installation

  • An inspection found cracked, spalled or displaced flue tiles
  • Pieces of clay tile appearing in the firebox
  • You are fitting a wood stove or insert into an existing fireplace
  • You are converting the appliance or the fuel
  • There has been a chimney fire
  • The chimney has no liner at all, which is common in older masonry

Book chimney liner installation today

Call (209) 447-0752 or request a quote online.

Process

How we do it

Measure and camera the flue

The existing flue is scanned and measured so the liner is sized to the appliance and the chimney, not to a standard.

Specify the liner

Diameter, grade and insulation chosen for the fuel and the position of the chimney, and quoted in writing.

Fit from the top

The liner is run from the top down, insulated where specified, and connected at the appliance.

Terminate and seal

New top plate, cap and seal at the crown so water cannot get between the liner and the masonry.

Test and document

Draft checked, the installation photographed and documented for your records and your insurer.

Our work

Recent chimney liner installation jobs

Photographs from jobs our own crews have completed.

Flues terminated and capped after liner work
Flues terminated and capped after liner work
Twin stainless flue caps fitted on a brick chimney
Twin stainless flue caps fitted on a brick chimney
Camera and access work at the top of the flue
Camera and access work at the top of the flue

Questions

Chimney Liner Installation FAQs

How long does a stainless liner last?

A quality stainless liner installed correctly and swept annually is a long-term component, and most carry a manufacturer warranty. Burning unseasoned wood or leaving creosote in place shortens that considerably.

Do I need a liner for a wood stove insert?

Almost always. An insert vented into a large open masonry flue drafts poorly and glazes the flue with creosote because the gases cool too fast. A correctly sized liner is what makes the insert work as intended.

Can a cracked clay flue be repaired instead of relined?

Sometimes, depending on the extent and location of the damage. We will tell you honestly which applies, because a repair that does not restore a continuous barrier is not worth doing.

More

Other services we offer

Contact Alpine Chimney

Alpine Chimney Company
1080 Broadway
Millbrae, CA 94030

(209) 447-0752
info@alpinechimneycompany.com

Open 24/7Every day, including holidays

Request a Free Quote

Fast response. No obligation.

Call (209) 447-0752