Free written estimate before any work begins

Chimney Repair in Pacifica, CA

From a cracked crown to a full rebuild, with the scope and the price agreed in writing before anyone picks up a tool.

Licensed & insured11 years experience5.0 star ratedUpfront pricing

Licensed & insured · 134 reviews

Get a Free Quote

Fast response. No obligation.

FreeWritten estimate before work
1-2 daysTypical crown or liner job
MatchedMortar mixed to the original

Chimney Repair for Pacifica homes

Pacifica is the hardest environment for a chimney anywhere in our service area, and we quote work here knowing that. Salt air, near-constant humidity and storms that arrive off the ocean with nothing in the way mean that metal components have a materially shorter life than they do five miles inland. Caps rust through, flashing corrodes, and prefabricated chimney sections in the Linda Mar and Rockaway tracts show damage at ages where an inland equivalent would still be sound. The masonry does not escape either, because horizontal rain driven into the seaward face of a stack soaks brick that would shed the same rainfall falling vertically. On the exposed streets in Pedro Point and above Sharp Park, we recommend stainless caps as a default rather than an upgrade.

The most corrosive setting we work in: direct ocean exposure, salt air, sustained humidity and wind-driven storm rain. Metal caps, flashing and factory-built chimney sections fail years earlier than inland equivalents. Horizontal rain saturates the seaward face of masonry stacks. Stainless components are specified as standard rather than as an upgrade.

Included in every job

  • The cause fixed, not the symptom
  • Written scope, fixed price
  • Matched materials
  • Work that suits the structure

Warning signs

When Pacifica homes need this service

  • Pieces of mortar or brick in the firebox or on the roof
  • Damp patches on the ceiling or wall next to the chimney breast
  • A white powdery bloom on the outside brickwork
  • The crown at the top is cracked, spalled or missing
  • The stack leans, bows, or has a visible gap where it meets the roof
  • Rusted or missing flashing at the roofline
  • Cracked or displaced flue tiles found during an inspection
  • Damage after an earthquake or a major storm

Chimney Repair in Pacifica

Call (209) 447-0752 for same-week availability.

Process

How the visit works

Diagnose the cause

Inspection first, including the roof and the flue, so the quote addresses the reason and not just the visible damage.

Scope and quote in writing

What we will do, the materials, the access needed and the price. Free, and yours to compare.

Protect the site

Roof and grounds protected before the work starts, and access arranged so nothing is dropped where it should not be.

Carry out the repair

Repointing, crown rebuilding, liner replacement, flashing, cap fitting or a full rebuild, depending on what the diagnosis found.

Water test and photograph

Where the repair addressed a leak we test it, and you get before and after photographs on completion.

Questions

FAQs

Why has my chimney cap rusted out again?

Because it is in Pacifica. Galvanised and painted steel caps have a short life in salt air on this coast. We fit stainless as the default here, and on the most exposed streets it is the only thing worth fitting.

My chimney only leaks in big winter storms. Is that normal?

It is the standard Pacifica pattern. Storm rain arrives close to horizontal and gets pushed into the face of the masonry rather than landing on top of it. That points the diagnosis at the brickwork and the flashing rather than the crown, and it is why we inspect all of it before quoting.

How do I know whether it needs repointing or rebuilding?

It depends on how deep the failure goes. If the mortar has eroded but the bricks are sound and the stack is straight, repointing is the answer. If bricks are spalling, the stack is leaning, or the structure has moved, rebuilding the affected section is the safer and often cheaper long-term option. The inspection tells us which.

My chimney leaks when it rains. Where is the water coming from?

Usually one of four places: a cracked crown, missing or failed flashing where the chimney meets the roof, porous or unpointed brickwork, or a missing cap letting rain straight down the flue. They present identically inside the house, which is why we diagnose before quoting.

Contact Alpine Chimney

Alpine Chimney Company
1080 Broadway
Millbrae, CA 94030

(209) 447-0752
info@alpinechimneycompany.com

Open 24/7Every day, including holidays

Request a Free Quote

Fast response. No obligation.

Call (209) 447-0752